Socket Mobile 56K Modem Card manual Insert the Card, Set up the Dial-up Connection

STEP 4: Insert the Card

Note: If you installed Socket’s WhereAreYou? software, you may want to use it now to set up the modem card for your country. You must start this process BEFORE inserting the card. For instructions, go to page 32.

Insert the 56K Modem Card into your mobile computer, with the gray label on top. If using a PC Card slot, first plug the card into a CompactFlash-to- PC Card adapter.

Plug the card directly into a CompactFlash I/O slot.

OR

Insert card into an adapter for use in a PC Card slot.

Warning! Do NOT insert the card upside down, or damage may occur!

When you insert the card, the Power and Data Status LEDs will blink then turn off.

STEP 5: Set up the Dial-up Connection

The process for setting up a dial-up connection differs between Pocket PC 2000/2002/2003, and Handheld PC devices. In the following pages, find the instructions for your specific type of Windows CE-based mobile computer.

You will need your dial-up information for this step. For most devices, this step involves two separate parts: making a new connection and entering the dialing settings.

CHAPTER 2: SETUP FOR WINDOWS CE 9