12.
The best practice is to align and seat the right side of the bezel (as you are facing the front of the SonicWALL CDP appliance), then view the connectors from above as you carefully press the left side of the bezel into place.
13.Lock the bezel with the front bezel security key.
Replacing a Single Hard Drive
The 2 TB replacement hard drive can be inserted into any drive slot on your SonicWALL CDP 6080 appliance. You can insert the drive while the SonicWALL CDP appliance is powered on.
The front bezel on the SonicWALL CDP appliance covers the drive slots. The bezel can be unlocked with the front bezel security key supplied with the appliance.
The Web management interface provides a graphical view of the hard drive array on the SonicWALL CDP appliance. The best practice is to view the array on the System > RAID page during the replacement process.
Removing the Defective Hard Drive from the SonicWALL CDP Appliance
To view the hard drive arrays and remove the defective drive from the SonicWALL CDP appliance, perform the following steps:
1.On your SonicWALL CDP appliance, use the front bezel key to unlock the front bezel, then remove the front bezel to expose the hard drive array.
2.In the Web management interface, navigate to the System > RAID page.
The defective drive is indicated by a red LED. When you mouse over the drive, a drive status box displaying a status such as DEVICE ERROR, UNKNOWN, or
You might see a different status than those listed, depending on the condition of the drive as interpreted by the RAID controller.
A status of DEGRADED is displayed for the array.
3.On the appliance, press the square button on the right side of the defective drive to pop out the drive handle.
