Item | Explanation |
EXIT | Exits the setting process |
| without saving the |
| measurement results. |
3Select “SAVE EXIT” in step 2.
The measurement results are saved.
4Press V/v repeatedly to select the Auto Calibration Type, then press .
Auto | Explanation |
Calibration |
|
Type |
|
|
|
FULL FLAT | Makes the measurement of |
| frequency from each speaker |
| flat. |
|
|
ENGINEER | Sets the frequency |
| characteristics to a set that |
| matches that of the Sony |
| listening room standard. |
|
|
FRONT REF | Adjusts the characteristics of |
| all the speakers to match the |
| characteristics of the front |
| speaker. |
|
|
OFF | Set the Auto Calibration EQ |
| to off. |
|
|
Tip
The size of a speaker (LARGE/SMALL) is determined by the low frequency characteristics. The measurement results may vary, depending on the position of the optimizer microphone and speakers, and the shape of the room. It is recommended that you follow the measurement results. However, you can change those settings in the Speaker settings menu. Save the measurement results first, then try to change the settings if you want.
When you select “PHASE INFO.”
You can check the phase of each speaker (in phase/out of phase).
Press V/v repeatedly to select a speaker, then press to return to step 1 in “To confirm/save Auto Calibration when GUI function is turned off”.
Display | Explanation |
| ||
window |
|
|
| |
|
|
|
| |
xxx*: IN | The speaker is in phase. |
| ||
|
|
|
| |
xxx*: OUT | The speaker is out of phase. The |
| ||
|
| “+” and |
| |
|
| speaker may be connected the |
| |
|
| other way around. However, |
| |
|
| depending on the speakers, |
| |
|
| “xxx: OUT” appears on the |
| |
|
| display even though the speakers |
| |
|
| are connected properly. This is |
| |
|
| because of the speakers’ |
| |
|
| specifications. In this case, you |
| |
|
| can continue to use the receiver. |
| |
|
|
|
| |
xxx*– – – | No speakers are connected. |
| ||
|
|
| ||
* xxx represent a speaker channel. |
| |||
FL | Front Left |
| ||
FR | Front Right |
| ||
CNT | Center |
|
|
|
SL | Surround Left |
| ||
SR | Surround Right |
| ||
SB | Surround Back |
| ||
SBL | Surround Back Left |
| ||
SBR | Surround Back Right |
| ||
SW | Subwoofer |
| ||
Tip |
|
|
|
|
Depending on the position of the subwoofer, the |
| |||
measurement results for polarity may vary. |
| |||
However, there will be no problems even if you |
| |||
continue to use the receiver with that value. |
| |||
|
|
|
|
|
|
|
|
| Other |
Selecting a sound field type |
| |||
|
| |||
|
|
|
| Operations |
|
|
|
|
For details on each sound field type, see “Enjoying a
Press 2CH/A.DIRECT, A.F.D.,
MOVIE, or MUSIC repeatedly.
The selected sound field type appears on the display.
continued
103GB