6 Press V/v repeatedly to select the surround sound you want.
To select enhanced surround mode1Select “Enhanced Sur Mode” in step 5 above.
2Press V/v repeatedly to select the enhanced surround sound you want.
3Press .
Note
The selected enhanced surround mode can only be applied if you have selected “Enhanced Sur” as a sound field in “Sound Field Setup” parameter.
To adjust the effect level1After you have selected the surround sound
in step 6, press or b.
2Press V/v repeatedly to adjust the effect
level, then press /B/b.
Higher settings apply more surround effect. You can adjust the effect level in 4 steps (50%, 80%, 100%, 150%).
Note
You may not able to adjust the effect level for some sound field.
x2ch Stereo
The receiver outputs the sound from the front left/right speakers only. There is no sound from the subwoofer.
Standard 2 channel stereo sources completely bypass the sound field processing and multi
channel surround formats are downmixed to 2 channel except LFE signals.
Note
No sound is output from the subwoofer in the 2ch Stereo mode. To listen to 2 channel stereo sources using the front left/right speakers and a subwoofer, select “A.F.D. Auto”.
This receiver will generate a low frequency signal for output to the subwoofer when there is no LFE signal, which is a
xAnalog Direct
You can switch the audio of the selected input to 2 channel analog input. This function enables you to enjoy high quality analog sources.
When using this function, only the volume and front speaker balance can be adjusted.
Sound Surround Enjoying
59GB