Notes

•Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. If the power supply of the receiver is not turned on, neither video nor audio signals will be transmitted.

•When connecting optical digital cords, insert the plugs straight in until they click into place.

•Do not bend or tie optical digital cords.

•Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may be distorted. In this case, place the antenna (aerial) farther away from the receiver.

Tips

•The receiver has a video conversion function. For details, see “Notes on converting video signals” (page 33).

•The sound of the TV is output from the speakers connected to the receiver if you connect the audio output jack of the TV to the TV IN jacks of the receiver. In this configuration, set the sound output jack of the TV to “Fixed” if it can be switched between either “Fixed” or “Variable”.

•All the digital audio jacks are compatible with

32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies.

4a: Connecting the audio components

How to hook up your components

This section describes how to hook up your components to this receiver. Before you begin, refer to “Component to be connected” below for the pages which describe how to connect each component.

After hooking up all your components, proceed to “5: Connecting the antennas (aerials)” (page 35).

Component to be connected

Page

Super Audio CD

With digital audio

20

player, CD player

output

 

 

 

 

 

With multi channel

22

 

audio output

 

 

 

 

 

With analog audio

23

 

output only

 

 

 

 

MD deck, Tape deck,

With analog audio

23

Analog disc turntable

output only

 

 

 

DIGITAL MEDIA PORT adapter

20

 

 

 

Notes

•Before connecting cords, make sure to disconnect the AC power cord (mains lead).

•When connecting optical digital cords, insert the plugs straight in until they click into place.

•Do not bend or tie optical digital cords.

Tip

All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies.

Started Getting

19GB