4b: Connecting the video components

How to hook up your components

This section describes how to hook up your components to this receiver. Before you begin, refer to “Component to be connected” below for the pages which describe how to connect each component.

After hooking up all your components, proceed to “5: Connecting the antennas (aerials)” (page 35).

Component to be connected

Page

TV

18

 

 

With HDMI jack

25

 

 

Blu-ray disc player

28

 

 

DVD player

29

 

 

Satellite tuner, Set-top box

30

 

 

DVD recorder, VCR

31

 

 

Camcorder, video game, etc.

31

 

 

Video input/output jacks to be connected

The image quality depends on the connecting jack. Refer to the illustration that follows. Select the connection according to the jacks on your components.

Digital Analog

High quality image

Notes

•Before connecting cords, be sure to disconnect the AC power cord.

•Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. If the power supply of the receiver is not turned on, neither video nor audio is transmitted.

Converting video signals

This receiver is equipped with a function for up- converting video signals. For details, see page 32.

24GB