a)If you have an additional front speaker system, connect them to the SPEAKERS FRONT B terminals. You can select the front speaker system you want to use with the SPEAKERS (OFF/A/B/A+B) button on the front panel (page 44).
b)If you connect only one surround back speaker, connect it to the SPEAKERS SURROUND BACK L terminals.
c)When you connect a subwoofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to a subwoofer, then sound may not be output.
Notes
•When you connect all the speakers with a nominal impedance of 8 ohms or higher, set “Speaker Impedance” in the Speaker settings menu to “8 ohms”. In other connections, set it to “4 ohms”. For details, see “8: Setting the speakers” (page 42).
•Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals.
Tip
To connect certain speakers to another power amplifier, use the PRE OUT jacks. The same signal is output from both the SPEAKERS terminals and the PRE OUT jacks. For example, if you want to connect just the front speakers to another amplifier, connect that amplifier to the PRE OUT FRONT L and R jacks.
Started Getting
17GB