8 Repeat steps 3 to 7 to preset another station.

To tune to preset stations

1Repeat steps 1 and 2 of “Presetting radio stations”.

2Press V/v to select the preset station you want.

You can select a preset station as follows:

•AM band AM 1 to AM 30

•FM band FM 1 to FM 30

To name preset stations

1Select a preset station you want to name.

2Press OPTIONS, then select “Name Input”.

For details on naming operations, refer to “Naming inputs” (page 86).

Using the Radio Data System (RDS)

(Models of area code CEL, CEK, ECE only)

This receiver also allows you to use RDS (Radio Data System), which enables radio stations to send additional information along with the regular program signal. You can display RDS information.

Notes

•RDS is operable only for FM stations.

•Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS services in your area, check with your local radio stations for details.

Receiving RDS broadcasts

Simply select a station on the FM band using Direct tuning (page 73), Automatic tuning (page 72), or preset tuning (page 74).

When you tune in a station that provides RDS services, “RDS” lights up and the program service name appears on the display.

Note

RDS may not work properly if the station you tuned to is not transmitting the RDS signal properly or if the signal strength is weak.

Operations Tuner

75GB