Amplifier Operations

Settings for the audio

(Audio settings menu)

You can use the Audio settings menu to make settings for the audio to suit your preference. Select “Audio” in the Settings menu. For details on adjusting the parameters, see “7: Operating the receiver using the GUI (Graphical User Interface)” (page 39).

Audio settings menu parameters

xA/V Sync

(Synchronizes audio and video output)

Lets you delay the output of audio to minimize the time gap between audio output and visual display. You can adjust the delay from 0 ms to 300 ms in 10 ms steps.

Notes

•This parameter is useful when you use a large LCD or plasma monitor or a projector.

•This parameter is not valid when

–the multi channel input is selected.

–“Analog Direct” is being used.

xDual Mono

(Digital broadcast language selection)

Lets you select the language you want to listen to during a digital broadcast. This feature only functions for Dolby Digital sources.

•Main/Sub

Sound of the main language will be output through the front left speaker, and sound of the sub language will be output through the front right speaker simultaneously.

•Main

Sound of the main language will be output.

•Sub

Sound of the sub language will be output.

xDecode Priority

(Digital audio input decoding priority)

Lets you specify the input mode for the digital signal input to the HDMI IN jacks.

•PCM

When signals from the HDMI IN jack are selected, only PCM signals are output from the connected player. To prevent interruption when playback starts, set to “PCM”. When signals in any other format are received, set this item to “AUTO”.

•AUTO

Automatically switches the input mode between Dolby Digital, DTS or PCM.

Note

Even when “Decode Priority” is set to “PCM”, the sound may be interrupted at the very beginning of the first track depending on the CD being played back.

56GB