Watching a DVD/Blu-ray Disc

SLEEP

2

DISPLAY

GUI MODE

3

6

•Refer to the operating instructions supplied with the TV and DVD player or Blu-ray Disc Player.

z

Select the audio format of the disc to be played, if necessary.

z

You can select the sound field to suit the movie or the music. Refer to page 63 for details.

Check the following if you cannot listen to the multi channel sound.

•Be sure the sound source corresponds to the multi channel format (the MULTI CHANNEL DECODING lamp on the front panel lights up during playback).

•Be sure this receiver is connected to the DVD player or Blu-ray Disc Player via a digital connection.

•Be sure the digital audio output of the DVD player or Blu-ray Disc Player is set up properly.

6

3

MULTI CHANNEL DECODING lamp

1 Turn on the TV and DVD player or Blu-ray Disc Player.

2 Turn on the receiver.

3 Press INPUT SELECTOR to select “DVD” or “BD”.

You can also use INPUT SELECTOR on this receiver to select “DVD” or “BD”.

4 Switch the input of the TV so that an image

of the DVD or Blu-ray Disc is displayed.

5 Play back the disc.

6 Adjust to a suitable volume.

7 After you have finished watching a DVD or Blu-ray Disc, eject the disc and turn off the receiver, the TV, and the DVD player or Blu- ray Disc Player.

Playback

53GB