Sony 970C Series manual What you need to do

1Using Your Printer

IN tray pushed in

Single envelope slot	IN tray
OUT tray down	pulled out
OUT tray up
Paper length guides
Paper width guide	Paper length guides

What do you want to print		What you need to do
Banners	1	Tear off the number of sheets (up to 20) you need.
	2	Tear off and discard the perforated strips, if any.
	3	Slide out the paper guides, and remove all paper from
		the IN tray.
	4	Raise the OUT tray and leave it in the Up position.
	5	Put the paper in the IN tray so that the unattached
		edge is at the top of the stack. Insert the first edge into
		the IN tray until it stops. Make sure the IN tray is
		pushed in.
	6	Slide paper guides snugly against the sheets.
	7	Check Banner Printing and choose the appropriate
		paper type and size.
	8	Print the banner.
Posters	1	Load paper in the IN tray.
	2	Slide the paper guides snugly against the sheets.
	3	Choose the print settings that match the type and size
		of your poster.
	4	Print your poster.

See next page

18