Picture
Symptom | Cause and/or corrective actions |
The picture jitters. | • A tape where video game pictures are recorded is |
| played back with TBC set to ON in the menu system. |
| m Set TBC to OFF. (p. 33) |
| • A tape in a poor condition, such as a tape recorded |
| repeatedly, is played back with TBC set to ON in the |
| menu system. |
| m Set TBC to OFF. (p. 33) |
|
|
An unknown picture is displayed. | • The camcorder is operating in Demo mode. |
| m Exit Demo mode. (p. 98) |
|
|
Others
Symptom | Cause and/or corrective actions |
The supplied Remote Commander does | • COMMANDER is set to OFF in the menu system. |
not work. | m Set it to ON. (p. 31) |
| • Something is blocking the infrared rays. |
| m Remove the obstacle. |
| • The battery is not inserted with the correct polarity. |
| m Insert the battery with the correct polarity. (p. 100) |
| • The batteries are dead. |
| m Insert new ones. (p. 100) |
|
|
The CHARGE lamp flashes after you | • The camcorder is not malfunctioning. |
charge the battery pack installed in the |
|
camcorder. |
|
Additional information / Información adicional
No function works though the power is on.
•Disconnect the connection plug on the battery pack or on the AC power adaptor, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, press the RESET button on the camcorder using a
AC power adaptor
Symptom | Corrective actions |
The VTR/CAMERA or CHARGE lamp | • Disconnect the mains lead. After about 1 minute, |
does not light. | reconnect the mains lead. (p. 7) |
|
|
The CHARGE lamp flashes. | • See the chart on the next page. |
|
|
85
