#∞ OPEN (BATT) release lever (p. 10)

Tripod receptacle (p. 20)

OPEN (CASSETTE) lever (p. 11)

Using the ETA-26 Handycam

Station adaptor

You can use the Handycam Station, etc., by attaching the ETA-26 Handycam Station adaptor. (1) Match the screw on the adaptor with the

screw hole for a tripod on the camcorder, then tighten the screw. You can slide the plate including the screw to the left or right until the camcorder is in the desired position.

(2) Connect the connection plug of the adaptor to the 26-pin connector on the camcorder.

#∞ Palanca de liberación OPEN (BATT) (p. 10)

Receptáculo del trípode (p. 20)

Palanca OPEN (CASSETTE) (p. 11)

Uso del adaptador ETA-26

Handycam Station

La Handycam Station, etc., puede utilizarse ajustando el adaptador ETA-26 Handycam Station.

(1)Introduzca el tornillo del adaptador en el orificio de tornillo para trípode de la videocámara y luego apriete el tornillo. La placa que contiene el tornillo puede deslizarse a izquierda o derecha hasta que la videocámara se encuentre en la posición deseada.

(2)Conecte el enchufe de conexión del adaptador al conector de 26 pines de la videocámara.

Additional information / Información adicional

1

2

Notes on the ETA-26 Handycam Station adaptor

•While the adaptor is attached to the camcorder, you cannot install nor remove the battery pack or cassette.

•While the adaptor is attached to the camcorder, you cannot mount the camcorder on a tripod.

Notas sobre el adaptador ETA-26 Handycam

 

Station

 

•Mientras el adaptador está ajustado en la

 

videocámara, no es posible instalar ni retirar el

 

paquete de baterías ni el videocassette.

 

•Mientras el adaptador está ajustado en la

 

videocámara, no es posible montar la

97

videocámara en un trípode.

Page 97
Image 97
Sony CCD-SC55 operating instructions Using the ETA-26 Handycam Station adaptor, Uso del adaptador ETA-26 Handycam Station