Recording a picture

 

Запись изображения

 

 

 

If you leave your camcorder in tape recording standby for five minutes while the cassette is inserted

Your camcorder automatically turns off. This is to save battery power and to prevent battery and tape wear. To resume tape recording standby, set the POWER switch to OFF (CHARGE), and to CAMERA again. To start recording, press START/STOP again without switching the POWER switch. However, your camcorder does not turn off automatically when the cassette is not inserted.

When you record in the SP and LP modes on one tape or you record in the LP mode •The transition between scenes is not smooth. •The playback picture may be distorted or the

time code may not be written properly between scenes.

The battery life when you record using the LCD screen

The battery time is slightly shorter than the shooting time using the viewfinder.

Ecли оcтaвить видeокaмepy cо вcтaвлeнной кacceтой в peжимe ожидaния зaпиcи нa пять минyт

Baшa видeокaмepa выключитcя aвтомaтичecки. Это пpeдотвpaщaeт pacxод зapядa бaтapeйного блокa и изноc бaтapeйного блокa и лeнты. Для возвpaтa в peжим ожидaния зaпиcи ycтaновитe пepeключaтeль POWER в положeниe OFF (CHARGE), a зaтeм cновa в положeниe CAMERA. Чтобы нaчaть зaпиcь, cновa нaжмитe кнопкy START/STOP, нe измeняя положeниe пepeключaтeля POWER. Oднaко, ecли кacceтa нe вcтaвлeнa, видeокaмepa aвтомaтичecки нe отключитcя.

Если Вы выполняете запись в режимах SP

иLP на одну ленту или же записываете несколько эпизодов в режиме LP

• Переход между сценами не будет плавным.

• Воспроизводимое изображение может быть искажено, или же код времени может быть не записан надлежащим образом между сценами.

Время использования батарейного блока при выполнении записи с помощью экрана

ЖКД

Время использования батарейного блока будет несколько короче, чем время съемки при использовании видоискателя.

36