Recording images from a tape as still images
Recording a still image fromexternal equipmentBefore operation
Set DISPLAY in to LCD in the menu settings. (The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) Play back the recorded tape, or turn the TV on to see the desired programme.
The image of the external equipment is displayed on the screen.
(3) Follow steps 3 and 4 on page 186.
Using the A/V connecting cable
OUT Yellow/
Geel
S VIDEO
VIDEO
VCR/AUDIO
Videorecorder
: Signal flow/ Signaalverloop
Beelden van een cassette opnemen als stilstaande beelden
Een stilstaand beeld vanexterne apparatuur opnemenAlvorens de camcorder te bedienen
Zet DISPLAY onder in het instelmenu op LCD. (De standaardinstelling is LCD.)
(1) Zet de POWER schakelaar in de VCR stand.
(2) Begin met afspelen van de opgenomen cassette, of zet het
Het beeld van de externe apparatuur verschijnt op het scherm.
(3) Volg stap 3 en 4 op pagina 186.
Gebruik van het
AUDIO/
VIDEO
S VIDEO
A/V connecting cable (supplied)/
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or the TV.
If your TV or VCR has an S video jack Pictures can be reproduced more faithfully by using an S video cable (optional).
With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable.
Connect an S video cable (optional) to the S video jacks of both your camcorder and the TV or VCR.
Verbind de gele stekker van de audio/video- aansluitsnoer met de
Als uw
Bij deze wijze van aansluiten hoeft u de gele (video) stekker van het audio/video- aansluitsnoer niet aan te sluiten.
Verbind het
188