Dubbing only desired scenes

Digital program editing (on tapes)

Step 2: Setting the VCR to operatewith the i.LINK cable

When you connect using the i.LINK cable (optional), follow the procedure below.

(1) Set the POWER switch to VCR on your camcorder.

(2) Turn the power of the connected VCR on, then set the input selector to DV input. When you connect a digital video camera recorder, set its power switch to VCR/VTR.

(3) Press MENU, then turn the SEL/PUSH EXEC dial to set VIDEO EDIT in to TAPE, then press the dial (p. 280).

(4) Turn the SEL/PUSH EXEC dial to select EDIT SET, then press the dial.

(5) Turn the SEL/PUSH EXEC dial to select CONTROL, then press the dial.

(6) Turn the SEL/PUSH EXEC dial to select i.LINK, then press the dial.

Alleen bepaalde scènes kopiëren

Digitale programmamontage (op cassettes)

Stap 2: De videorecorder instellen om met de i.LINK kabel te werken

Ga als volgt tewerk bij gebruik van een i.LINK- kabel (los verkrijgbaar).

(1) Zet de POWER schakelaar van uw camcorder op VCR.

(2) Schakel de aangesloten videorecorder in, en zet de ingangskeuzeschakelaar op de DV ingangsstand. Wanneer u een digitale camcorder aansluit, zet u de POWER schakelaar op VCR/VTR.

(3) Druk op MENU, draai aan de SEL/PUSH EXEC regelknop om VIDEO EDIT onder op TAPE te zetten, en druk vervolgens op de regelknop (p. 290).

(4) Draai aan de SEL/PUSH EXEC regelknop om in te stellen op EDIT SET, en druk de regelknop in.

(5) Draai aan de SEL/PUSH EXEC regelknop om in te stellen op CONTROL, en druk de regelknop in.

(6) Draai aan de SEL/PUSH EXEC regelknop om in te stellen op i.LINK, en druk de regelknop in.

134