Recording still images on a “Memory Stick” during tape recording

Recording images with theflash

The flash pops up automatically. The default setting is auto (no indicator). To change the flash mode, press (flash) repeatedly until the flash mode indicator appears on the screen.

Opnemen van stilstaande beelden op een “Memory Stick” tijdens bandopname

Opnemen met de flitslamp

De flitslamp klapt automatisch uit. De standaardinstelling is auto (geen aanduiding). Om de flitslampstand te wijzigen, drukt u herhaaldelijk op de (flitslamp) tot de aanduiding voor de flitslampstand verschijnt op het scherm.

(flash)/(flitslamp)

Each press of (flash) changes the indicator as follows:

tt t (no indicator) Auto red-eye reduction:

The flash fires before recording to reduce red-eye.

Forced flash: The flash fires regardless of the surrounding brightness.

No flash: The flash does not fire.

The flash is automatically adjusted to the appropriate brightness. You can also change FLASH LVL to the desired brightness in the menu settings (p.271). Try recording various images to find the most appropriate setting for

FLASH LVL.

Bij elke druk op (flitslamp) verandert de aanduiding als volgt:

tt t (geen aanduiding)

Automatische beperking van rode ogen: de flitslamp werkt voor de opname om rode ogen te beperken.

Geforceerde flitslamp:

de flitslamp werkt ongeacht het omgevingslicht.

Geen flitslamp:

de flitslamp werkt niet.

De flitslamp werkt automatisch volgens de omgevingslichtsterkte. FLASH LVL kan ook via het instelmenu worden ingesteld (p. 281). Zoek de meest geschikte instelling voor FLASH LVL door verschillende beelden op te nemen.

64