Connecting your camcorder to your computer using the USB cable – For Windows users
If you cannot install the USBdriverThe USB driver has been registered incorrectly as your computer was connected to your camcorder before installation of the USB driver was completed. Perform the following procedure to correctly install the USB driver.
Uw camcorder aansluiten op uw computer met een USB kabel
– Voor Windows gebruikers
Indien u de USB driver niet kuntinstallerenDe USB driver wordt verkeerd geregistreerd wanneer uw computer op uw camcorder werd aangesloten voor de installatie van de USB driver was voltooid. Herhaal de volgende procedure om de USB driver correct te installeren.
Viewing images recorded on a tape
Step 1: Uninstall the incorrect USB driver
1Turn on your computer and allow Windows to load.
2Connect the AC power adaptor, and set the POWER switch to VCR.
3Connect the USB connector on your computer
to the (USB) jack on your camcorder using the USB cable supplied with your camcorder.
4Open your computer’s “Device Manager”.
Windows XP Home Edition/Professional:
Select “Start” t “Control Panel” t “System” t “Hardware,” and click the “Device Manager” button.
If there is no “System” inside “Pick a category” after clicking “Control Panel,” click “Switch to classic view” instead.
Windows 2000 Professional:
Select “My Computer” t “Control Panel” t “System” t “Hardware” tab, and click the “Device Manager” button.
Windows 98SE/Windows Me:
Select “My Computer” t “Control Panel” t “System,” and click “Device Manager.”
Beelden op een cassette bekijken
Stap 1: Verwijder de verkeerde USB driver
1Zet uw computer aan en laat Windows laden.
2 Sluit de netspanningsadapter aan en zet de POWER schakelaar op VCR.
3 Verbind de USB aansluiting van uw computer
en de (USB) aansluiting op uw camcorder met behulp van de meegeleverde
4Open de “Device Manager” van uw computer.
Windows XP Home Edition/Professional:
Kies “Start” t “Control panel” t “System” t “Hardware” en klik op “Device Manager”. Indien “System” niet voorkomt onder “Pick a category” nadat u op “Control Panel” hebt geklikt, klik dan op “Switch to classic view” in de plaats.
Windows 2000 Professional:
Kies “My Computer” t “Control panel” t “System” t “Hardware” en klik op “Device Manager”.
Windows 98SE/Windows Me:
Kies “My Computer” t “Control panel” t “System” en klik op “Device Manager.”
248