Outline, Main Features | Sony DFW-SX900, DFW-X700 specs

DFW-SX900

DFW-X700

OUTLINE

The DFW-SX900/X700 is a C-mounted color digital video camera utilizing a 1/2-type PS IT CCD. The IEEE1394-1995 digital interface realizes a transfer speed of 400M bps and outputs of SXGA (1,280 × 960)/YUV (4 : 2 : 2)/7.5 fps with the DFW-SX900, XGA (1,024 × 768)/YUV (4 : 2 : 2)/15 fps with the DFW-X700. In addition, the DFW-SX900/X700 also adopts a primary color filter CCD to realize good color reproductivity, as well as a square pixel CCD to eliminate the need for aspect ratio conversion in the image processor.

MAIN FEATURES

1/2-type progressive scan IT CCD

Primary color filter/square pixel/progressive scan CCD

Non-compressed YUV (4 : 2 : 2) 8 bits each

External trigger function

The external trigger shutter function allows the image exposure to be coordinated with external equipment and moving objects. The exposure time can be controlled via software over the IEEE1394 bus.

Solid aluminum diecasting chassis

Partial scan/output of images is possible by the partial scan function

1

Image 3

Sony DFW-SX900, DFW-X700 technical manual Outline, Main Features

Contents

Technical Manual Table of Contents Outline Main Features System Components Specifications Connection Pin assignment of Trig in connector female Pin assignment of camera connectorNames and Functions of Parts Dimensions Top View CCD Pixel Location Spectral Characteristics Typical Values Camera Functions Functions Brightness GainShutter Auto Exposure White Balance Color TemperatureGamma Sharpness Trigger SaturationIsochronous Start/Stop One Shot Time until Data is Read Out and Output Period of Data Operations in Normal ModeWhen exposure time is 1 frame or shorter Operations in Normal Mode Operations When Frame Rate is Reduced When exposure time is over 1 frame Inside Camera SUB Isochronous Front Panel LED Inputting trigger and pulse conditions External Trigger Shutter External Trigger Shutter Operations Camera Exposure Time Example of Acceptable Trigger Interval Cutting size Partial Scan Mode CSR F0F00600h Current Frame Rate CSR F0F00000h Camera Initialize Register Write Only CSR F0F00608h Current Video Format CSR F0F00604h Current Video Mode CSR F0F00614h Isochronous Transmission Start/Stop CSR F0F0060Ch CSR F0F00624h Current Memory Channel CSR F0F00618h Memory SaveCSR F0F0061Ch One Shot CSR F0F00620h Memory Save Channel CSR F0F00800h Brightness CSR F0F00804h Auto ExposureCSR F0F00808h Sharpness One-Push Auto White Balance CSR F0F0080Ch White Balance CSR F0F00810h Hue CSR F0F00814h SaturationCSR F0F00818h Gamma CSR F0F0081Ch Shutter Auto exposure CCD IrisShutter OFF Auto Gain Control CSR F0F00820h GainCSR F0F00830h Trigger CSR F0F0088Ch Optical Filter CSR F1000108h Image Position For Format7 Minimum Unit for DFW-SX900 Minimum Unit for DFW-X700 When DFW-SX900When DFW-X700 CSR F100000Ch Image Size CSR F1000144h Byte per Packet CSR F1000110h Color Coding ID General precautions for partial scan function Acquiring the camera control register base address Command Sending Procedure Until Images are Displayed Check available frame rates Example Format0 Mode3 Acquiring the format/mode/frame rateCheck available formats Check available video modes To set the trigger mode Video transmission start command Acquire the MaxSize/UnitSize/ColorCodingID Procedure for Format7Aquire the available mode for Format7 Acquire the CSR offset address of Mode0 Specify the packet size Video transmission start command Format7 Command Setting and Operation Timing One Shot CMD and actual operation timing Trigger Mode command and actual operation timing Camera Supplements List of Camera FunctionsIEEE1394 Cable Features Recommended Specifications for Personal Computer PCHost Adapter Card DFWA-400 Specifications Installing the Host Adapter Card Setup of the Driver PrecautionsPrecautions on software provided For Windows NT4.0 Setting up the driverSetting up the demonstration software For WindowsPage DFW-SX900