One Shot CMD and actual operation timing | Sony DFW-SX900, DFW-X700

DFW-SX900

DFW-X700

COMMAND SETTING AND OPERATION TIMING

One Shot CMD and actual operation timing

As shown in the following figure, it takes at least about 1 V for the actual isochronous transmission to start after the One Shot command (CSR F0F0061Ch) has been set to the CSR of the camera.

(VDs are the reference signals inside the camera and cannot be observed from outside the camera.)

Set One Shot in this period

VD

1 V

Approx. 8.0 ms (DFW-SX900) Approx. 2.4 ms (DFW-X700)

Isochronous

ON

One Shot is executed with an interval of 1 V from V period set

If Shutter is set to the extended exposing mode, isochronous transmission start may delay for the exposure time at maximum in addition to the previous delay.

Do not set a new One Shot command until isochronous transmission completes after the One Shot command has been set to the CSR.

Trigger Mode command and actual operation timing

As shown in the following figure, it takes about 430 ms (DFW-SX900), 360 ms (DFW-X700) at the least for external trigger signals to be received (Trigger Mode) after the Trigger ON command has been set to the CSR (F0F00830h) of the camera.

Set Trigger ON in this period

VD

1 V

Approx. 430 ms (DFW-SX900) Approx. 360 ms (DFW-X700)

NORM. until now Trigger Mode from here

Isochronous

Image by external trigger signal is output from here at the earliest

39

Image 41

Sony DFW-SX900, DFW-X700 One Shot CMD and actual operation timing, Trigger Mode command and actual operation timing

Contents

Technical Manual Table of Contents Outline Main Features System Components Specifications Connection Names and Functions of Parts Pin assignment of Trig in connector femalePin assignment of camera connector Dimensions Top View CCD Pixel Location Spectral Characteristics Typical Values Camera Functions Functions Shutter GainAuto Exposure Brightness Gamma Color TemperatureSharpness White Balance Isochronous Start/Stop SaturationOne Shot Trigger When exposure time is 1 frame or shorter Operations in Normal ModeOperations in Normal Mode Time until Data is Read Out and Output Period of Data Operations When Frame Rate is Reduced When exposure time is over 1 frame Inside Camera SUB Isochronous Front Panel LED Inputting trigger and pulse conditions External Trigger Shutter External Trigger Shutter Operations Camera Exposure Time Example of Acceptable Trigger Interval Cutting size Partial Scan Mode CSR F0F00600h Current Frame Rate CSR F0F00000h Camera Initialize Register Write Only CSR F0F00608h Current Video Format CSR F0F00604h Current Video Mode CSR F0F00614h Isochronous Transmission Start/Stop CSR F0F0060Ch CSR F0F0061Ch One Shot CSR F0F00618h Memory SaveCSR F0F00620h Memory Save Channel CSR F0F00624h Current Memory Channel CSR F0F00808h Sharpness CSR F0F00800h BrightnessCSR F0F00804h Auto Exposure One-Push Auto White Balance CSR F0F0080Ch White Balance CSR F0F00818h Gamma CSR F0F00810h HueCSR F0F00814h Saturation Shutter OFF CSR F0F0081Ch ShutterAuto exposure CCD Iris CSR F0F00830h Trigger CSR F0F00820h GainCSR F0F0088Ch Optical Filter Auto Gain Control CSR F1000108h Image Position For Format7 When DFW-X700 When DFW-SX900CSR F100000Ch Image Size Minimum Unit for DFW-SX900 Minimum Unit for DFW-X700 CSR F1000144h Byte per Packet CSR F1000110h Color Coding ID General precautions for partial scan function Acquiring the camera control register base address Command Sending Procedure Until Images are Displayed Check available formats Acquiring the format/mode/frame rateCheck available video modes Check available frame rates Example Format0 Mode3 To set the trigger mode Video transmission start command Aquire the available mode for Format7 Procedure for Format7Acquire the CSR offset address of Mode0 Acquire the MaxSize/UnitSize/ColorCodingID Specify the packet size Video transmission start command Format7 Command Setting and Operation Timing One Shot CMD and actual operation timing Trigger Mode command and actual operation timing Camera IEEE1394 Cable SupplementsList of Camera Functions Host Adapter Card DFWA-400 FeaturesRecommended Specifications for Personal Computer PC Specifications Installing the Host Adapter Card Precautions on software provided Setup of the DriverPrecautions Setting up the demonstration software Setting up the driverFor Windows For Windows NT4.0Page DFW-SX900