![](/images/new-backgrounds/1178704/17870459x1.webp)
SETTINGS OF CAMERA CONTROL AND STATUS REGISTER
CSR F0F00820h Gain
Adjust the gain of the video signal amplifier. Auto Gain Control can be also set.
(1) | Manual adjustment |
|
| Command = 82000nnnh | nnn: Adjust in the range of 800h (min) – 8B4h (max). |
|
| 800h is the standard value. |
(2) | Auto Gain Control |
|
| ON : Command = 83000∗∗∗h | ∗∗∗: Undefined |
| OFF : Specify 82000nnnh. (Or read out the gain value once and rewrite the value.) |
CSR F0F00830h Trigger
When inputting a negative polarity signal to the TRIG IN connector at the back of the camera, isochronous transmission of
images for only one frame will be performed.
ON : Command = 8200mnnnh | m = 0: mode0 |
| m = 3: mode3 |
| nnn becomes effective and trigger is input |
| repeatedly at intervals 10 ms times the value set. |
OFF : Command = 80000000h |
|
NOTE : If the CSR F0F00600th settings are not set properly and Iso_EN is not ON at the same time, no isochronous transmission of images will be executed even when trigger signals are input.
CSR F0F0088Ch Optical Filter
Set the appropriate white balance preset for the main light source.
LightingCommand
tungsten lamp (3,200 K) | 82000000h |
day light (5,600 K) | 82000001h |
NOTE : The CSR F0F0080Ch White Balance is canceled by this command. (Priority to latter)
28