Gain, Shutter, Auto Exposure, Brightness | Sony DFW-X700, DFW-SX900

DFW-SX900

DFW-X700

FUNCTIONS

Gain

Used for setting the gain of the video signal amplifier. The gain can be set to 180 steps between the standard gain and maximum +18 dB. (1 step is not 0.1 dB.)

By setting AUTO to ON, the gain will be automatically adjusted to the appropriate exposure. The range of operations is 0 to +18 dB.

Shutter

The CCD exposure time can be set between the maximum 2 seconds and minimum 1/20,000 seconds. By setting AUTO to ON, the exposure time will be automatically adjusted to the appropriate exposure.

Auto Exposure

Used for setting the exposure compensation for when Gain or Shutter or both are operating in the AUTO mode. When both Gain and Shutter are set to Manual, the Auto Exposure setting will be invalid. The range of operations is about –1EV to +0.5EV.

If both Gain and Shutter are operated in the AUTO mode by Auto Exposure, the ranges of operations of both are as follows. (However, these values are approximate values and may differ according to the adjusted and operating states of the camera.)

EV7		EV10			EV17* (SX900)
		AGC			CCD IRIS

* EV16 for X700

Brightness

The brightness of images can be controlled by changing the black level setting. Adjust the brightness if the appropriate gradation cannot be obtained due to the blurring of the black portions of the image.

The range of settings is about 0 to 75 (when gamma is ON (1) in full range 255).

10

Image 12

Sony DFW-X700, DFW-SX900 technical manual Gain, Shutter, Auto Exposure, Brightness

Contents

Technical Manual Table of Contents Main Features Outline System Components Specifications Connection Pin assignment of Trig in connector female Pin assignment of camera connectorNames and Functions of Parts Dimensions CCD Pixel Location Top View Spectral Characteristics Typical Values Functions Camera Functions Gain ShutterAuto Exposure Brightness Color Temperature GammaSharpness White Balance Saturation Isochronous Start/StopOne Shot Trigger Operations in Normal Mode When exposure time is 1 frame or shorterOperations in Normal Mode Time until Data is Read Out and Output Period of Data When exposure time is over 1 frame Operations When Frame Rate is Reduced Inside Camera SUB Isochronous Front Panel LED External Trigger Shutter Inputting trigger and pulse conditions External Trigger Shutter Operations Example of Acceptable Trigger Interval Camera Exposure Time Partial Scan Mode Cutting size CSR F0F00000h Camera Initialize Register Write Only CSR F0F00600h Current Frame Rate CSR F0F00604h Current Video Mode CSR F0F00608h Current Video Format CSR F0F0060Ch CSR F0F00614h Isochronous Transmission Start/Stop CSR F0F00618h Memory Save CSR F0F0061Ch One ShotCSR F0F00620h Memory Save Channel CSR F0F00624h Current Memory Channel CSR F0F00800h Brightness CSR F0F00804h Auto ExposureCSR F0F00808h Sharpness CSR F0F0080Ch White Balance One-Push Auto White Balance CSR F0F00810h Hue CSR F0F00814h SaturationCSR F0F00818h Gamma CSR F0F0081Ch Shutter Auto exposure CCD IrisShutter OFF CSR F0F00820h Gain CSR F0F00830h TriggerCSR F0F0088Ch Optical Filter Auto Gain Control For Format7 CSR F1000108h Image Position When DFW-SX900 When DFW-X700CSR F100000Ch Image Size Minimum Unit for DFW-SX900 Minimum Unit for DFW-X700 CSR F1000110h Color Coding ID CSR F1000144h Byte per Packet General precautions for partial scan function Command Sending Procedure Until Images are Displayed Acquiring the camera control register base address Acquiring the format/mode/frame rate Check available formatsCheck available video modes Check available frame rates Example Format0 Mode3 Video transmission start command To set the trigger mode Procedure for Format7 Aquire the available mode for Format7Acquire the CSR offset address of Mode0 Acquire the MaxSize/UnitSize/ColorCodingID Video transmission start command Format7 Specify the packet size Command Setting and Operation Timing Trigger Mode command and actual operation timing One Shot CMD and actual operation timing Camera Supplements List of Camera FunctionsIEEE1394 Cable Features Recommended Specifications for Personal Computer PCHost Adapter Card DFWA-400 Specifications Installing the Host Adapter Card Setup of the Driver PrecautionsPrecautions on software provided Setting up the driver Setting up the demonstration softwareFor Windows For Windows NT4.0Page DFW-SX900