Drive Mode, Tips for preventing blur | Sony DSC-RX100M2/B guide

Before Use

Operating the camera

Shooting

Viewing

Useful shooting functions

Useful viewing functions

Changing settings

Viewing images on a TV

Using with your computer

Printing

Troubleshooting

Precautions / About this camera

Contents list

Search	Print

Top page > Useful shooting functions > Using shooting functions > Drive Mode

Drive Mode

You can set a drive mode, such as continuous, self-timer, or bracket shooting. You can select the [Drive Mode] also from MENU.

1.Press / (Drive Mode) on the control wheel.

When another function is assigned to the control wheel, press the MENU button 2 [Drive Mode].

2.Select the desired mode with the control wheel.

Select detailed settings using		/	if the selected mode has such options.

(Single	The camera shoots a single image without using the self-timer.
Shooting)
Shooting)

(Cont.	The camera shoots continuous images while the shutter button is pressed.
Shooting)
Shooting)

(Spd	Shoots images continuously at high speed while you press and hold down the
Priority	shutter button. Focus and brightness settings of the first shot are used for the
Cont.)	following shots.

	Sets the self-timer to a 10-second or 2-second delay.
(Self-	When you press the shutter button, the self-timer lamp flashes and a beep sounds
timer)	until the shutter operates.
	To cancel, press	/	again.

(Self-	Sets the self-timer to Self-portrait timer.
(Self-	When the camera detects the specified number of faces, a beep sounds, and the
portrait)
portrait)	shutter operates 2 seconds later.
	shutter operates 2 seconds later.

(Self-	The camera shoots continuous frames 10 seconds after you press the shutter
timer(Cont))	button. Select the number of frames from three or five.

(Bracket:	Shoots three images, each with different degrees of brightness. You can set the
(Bracket:	value of bracket deviation (steps).
Cont.)	value of bracket deviation (steps).
Cont.)

	Shoots three images, each with different degrees of brightness according to the
(WB	selected settings of white balance, color temperature and color filter. You can select
bracket)	the value of bracket deviation (steps) from [Lo] or [Hi].

If your hands or body move while holding the camera and pressing the shutter button, “Camera shake” occurs.

Camera shake occurs frequently under low-light or slow shutter speed conditions, such as those encountered in (Night Portrait) or (Night Scene) mode.