Sony DSCRX100M2/B, DSC-RX100M2 Upload Settings, Transferring image data using the Eye-Fi card

Cyber-shot User Guide

Before Use

Operating the camera

Shooting

Viewing

Useful shooting functions

Useful viewing functions

Changing settings

Viewing images on a TV

Using with your computer

Printing

Troubleshooting

Precautions / About this camera

Contents list

Search Print

Top page > Changing settings > Setup menu > Upload Settings

Upload Settings

Transferring image data using the Eye-Fi card

Sets whether to use the upload function of an Eye-Fi card (commercially available), when you use the Eye-Fi card with this camera.

[Upload Settings] is displayed only when the Eye-Fi card is inserted in the camera.

1.MENU 2 [Upload Settings] desired mode

	Uses the upload function.
	The Eye-Fi mode display icon on the screen will change depending on the communication
	mode of the Eye-Fi card.
On	: Eye-Fi card is in standby mode. There is no image to be sent.
	: Eye-Fi card is in upload standby mode.

: Eye-Fi card is in connecting mode.

: Eye-Fi card is uploading images. : An error has occurred.

Off Does not use the upload function.

Notes

Eye-Fi cards are sold in only some countries/regions.

For more information on the Eye-Fi card, contact the manufacturer or seller of Eye-Fi cards directly. Eye-Fi cards are permitted only in the countries and regions in which they were purchased. You may be held liable due to local restrictions.

The Eye-Fi card has a wireless LAN function. Do not insert the Eye-Fi card where wireless LAN is prohibited, such as while aboard an airplane. If the Eye-Fi card is inserted, set [Upload Settings] to

[Off]. When the uploading function of the Eye-Fi card is set to [Off], is displayed on the screen.

Transferring image data using the Eye-Fi card

1.Set the wireless LAN access point settings or the transferring direction settings of the Eye-Fi card. For details, refer to the operating instructions supplied with the Eye-Fi card.

2.After the settings are finished, insert the Eye-Fi card into the camera, and shoot the images. The recorded images are automatically transferred via wireless LAN to a PC, etc.

Notes

When uploading image data, the Auto power-off function is not available.

If the (error) icon is displayed, eject and re-insert the Eye-Fi card, or turn the power of the

camera off and on again. If the	(error) icon is still displayed, the Eye-Fi card may be corrupted.
For details, contact Eye-Fi, Inc.

Wireless LAN communication may be interrupted by other communication devices. If data reception is insufficient, move the camera closer to the access point.

Some Eye-Fi cards have an “Endless Memory Mode.” This product does not support “Endless Memory Mode.” Make sure that Eye-Fi cards that you insert into this product have “Endless Memory Mode” turned off. For details on setting “Endless Memory Mode”, refer to the operating instructions supplied with the Eye-Fi card.

193