The unit can display various superimposed data items on the
To display various data items on an external monitor, set the CHARACTER DISPLAY switch to ON.
You can select data items to be displayed using the DISPLAY SELECT selector.
Menu screenTo display the menu screen, set the DISPLAY SELECT selector to MENU. You can change or confirm the menu item settings on this screen.
For details on the menu, see “Chapter 5 Adjusting and Setting Through Menus” on page 54 (GB).
TC ⁄ UB SET
TC TC PRESET
CM UB PRESET
DISP DV IN TC
VTC MAKE A TC RUN
VTR TC FORMAT
ETC
Data screenTo display the data screen, set the DISPLAY SELECT selector to DATA. You can confirm important information for recording or playback, such as time code or remaining tape time, on this screen.
23
1 |
|
| N TC 00:12:34:12 | 4 |
|
| |||
|
|
| 122min | 5,6 |
|
|
| PHOTO | |
|
|
| SEARCH | 7 |
|
|
| Z | |
|
| % |
| |
|
|
| DEW |
|
|
|
| DETECTED |
|
|
|
| DVCAM | 8 |
|
|
| NS 48K | 9 |
|
|
| DV I N | |
|
|
|
| |
|
|
|
| q; |
|
|
|
| |
|
|
|
| qa |
1Cassette memory indicator
This item is shown when a cassette with cassette memory has been loaded. If the cassette is ejected while data is being written on the cassette memory, the indicator flashes.
2Tape transport mode indicator Displays the tape transport mode.
3Time counter (time code/user bits/count value of the counter) indicator
Displays the count value of the counter, time code, or user bits. By setting the COUNTER SELECT selector on the front panel, you can select the item to be displayed.
When the time code is displayed, TC appears to its left. In the drop frame mode, a period is displayed between the minutes and seconds. (Example: 00:12.58:00)
When the user bits are displayed, UB appears to their left.
When the count value of the counter is negative,
The count value of the counter consists of seven digits. If the
Notes
•The counter operates on a
•The count value of the counter consists of seven digits. The leftmost digit is not displayed. (i.e.; If the actual count value is “11:22:11:22,” the displayed value will be “1:22:11:22.” ) However, the unit recognizes that the hours value is 11.
4Remaining tape time indicator Displays the remaining tape time.
Note
When you insert a cassette in which the tape has been rewound to the beginning, this indicator will not show the remaining tape time. The remaining tape time is displayed after the tape runs for a while.
5Search indicator
Displays the search mode when you search for scenes using the Remote Commander or the
For details on the search function, see “Searching using the search function” on page 33 (GB).
(Continued)
Overview 1 Chapter
Chapter 1 Overview | 23 (GB) |