Sony DSR-25 manual 59

Icon/Menu	Submenu	Setting
	(page)
CM CM SET	TAPE LABEL Makes a tape label. (You can enter up to 10 characters on a tape label.)
		If you select this item, one of the following symbols appears. If no cassette is loaded,
		nothing is displayed.
		: Cassette with cassette memory
		: Cassette without cassette memory
		You can make a tape label as follows:

1On the TAPE LABEL screen, select a line that has the alphabet character you want by pressing the J/j buttons and the EXEC button. (The cursor moves to the first character of the line.)

TAPE LABEL					TAPE LABEL
__________					__________
	ABCDE	1 2 3 4 5			ABCDE	1 2 3 4 5
	FGH I J	6 7 8 9 0		,	FGH I J	6 7 8 9 0
	KLMNO	'. , / –			KLMNO	'. , / –
	PQRST	[	]		PQRST	[	]
	UVWXY	[ SET ]			UVWXY	[ SET ]
	Z& ? !				Z& ? !

2Select a character by pressing the J/j buttons and the EXEC button. (The selected character is entered. To erase a character, select [ P ]; the last character is erased.)

TAPE LABEL
				TAPE LABEL
__________				S_________
ABCDE	1 2 3 4 5			ABCDE	1 2 3 4 5
FGH I J	6 7 8 9 0		,	FGH I J	6 7 8 9 0
KLMNO	'. , / –			KLMNO	'. , / –
PQRST	[	]		PQRST	[	]
UVWXY	[ SET ]			UVWXY	[ SET ]
Z& ? !				Z& ? !

3Repeat steps 1 and 2. After entering all characters for the tape label, select [SET].

Note

The unit cannot display the TAPE LABEL screen in the following cases:

•The unit does not have a cassette inserted or the tape is being unloaded.

•The cassette does not have cassette memory.

•The cassette memory is full of data other than the tape label data.

•The cassette is write-protected.

•The tape is being recorded.

•The tape is being duplicated.

•The cassette memory is being used.

Menus Through Setting and Adjusting 5 Chapter

Chapter 5 Adjusting and Setting Through Menus 59 (GB)