Overview 1 Chapter

Location and Function of Parts

qa DATA CODE button

Press this button to display the data codes (recording date/time, camera data).

For details on data codes, see “Displaying information (data codes) recorded on a tape” on page 32 (GB).

qs 1 (on/standby) switch

Notes

•The command mode of the supplied Remote commander is set to VTR4. You cannot change this setting.

•Set COMMANDER on the OTHERS menu to WIRELESS to enable the Remote Commander to control the unit.

•In addition to the Remote Commander supplied with the unit, the unit accepts signals from any Sony Remote Commander whose command mode is set to VTR4. If you want to disable the control from any Remote Commander, set COMMANDER on the OTHERS menu to CONTROL S.

Battery installation

1 Push and slide the lid to open.

2 Install two size AA (R6) batteries (supplied) with the correct polarity.

Be sure to install the battery from the # side.

3 Replace the lid.

Notes on batteries

•Make sure that the battery orientation is correct when inserting batteries.

•Do not mix an old battery with a new one, or mix different types of batteries.

•If you do not intend to use the Remote Commander for a long time, remove the batteries to avoid damage from battery leakage. If the batteries have leaked, remove them, wipe the battery compartment dry and replace the batteries with new ones.

To remove the batteries

Remove the lid as step 1 and take out the batteries.

22 (GB)

Chapter 1 Overview