Overview 1 Chapter

Location and Function of Parts

•If you set FF/REW SPD on the VTR SET menu to SHUTTLEMAX, you can display the picture while fast-forwarding the tape.

For details on the tape transport speed of the SHUTTLEMAX setting, see “FF/REW SPD” in the “VTR SET menu” on page 65 (GB).

5PAUSE button/indicator

When you press this button during recording, playing, or audio dubbing, the current operation goes into the pause mode. Pressing this button again resumes the operation. The indicator lights while the unit is in the pause mode.

6REC (record) button/indicator

When you press the PLAY button while holding this button down, the PLAY and REC indicators light and recording starts.

When the unit is in the stop mode, you can check EE signals for an image, sound (channels 1 and 2) and time code by pressing this button. During this check, the REC indicator lights. To stop this operation, press the STOP button.

For details, see “EE/PB SEL” in the “DISPLAY SET menu” on page 62 (GB). For details on time codes, see “DSR-25 time codes” on page 46 (GB).

Note

The unit can record only in the DVCAM format or in the SP mode of the DV format.

7AUDIO DUB (audio dubbing) button/indicator Use this button to dub sounds. The indicator lights while sounds are being dubbed.

For details on audio dubbing, see “Audio Dubbing” on page 52 (GB).

When the unit is in the stop mode and the INPUT SELECT selector is set to other than DV, you can listen to the EE signal of the sound (channels 3 and 4) to be dubbed by pressing this button. During this operation, the indicator lights. To stop the operation, press the STOP button.

For details, see “EE/PB SEL” in the “DISPLAY SET menu” on page 62 (GB).

8DUP (duplicate) button/indicator

Use to duplicate a tape, including the time code. During duplication, the indicator lights.

For details on the duplicate function, see “Duplication (generating a work tape with the same time code)” on page 47 (GB).

When the unit is in the stop mode and a DV signal is selected and input, you can check the EE signals for an image, sound and time code by pressing this button. During the check, the indicator lights. To stop this operation, press the STOP button.

For details, see “EE/PB SEL” in the “DISPLAY SET menu” on page 62 (GB). For details on time codes, see “DSR-25 time codes” on page 46 (GB).

14 (GB)

Chapter 1 Overview