Operating the Menus

AUDIO SET menu

Icon/Menu

Submenu

Setting

(page)

 

 

 

 

 

 

 

 

A AUDIO SET AUDIO

Selects the audio mode.

 

MODE

 

FS32K

: Switches the audio mode to the four channel mode (12-bit mode).

(page 52 (GB)) FS48K: Switches the audio mode to the two channel stereo mode (16-bit mode). (This setting records the sound in all audio ranges, providing a high-quality sound recording.)

Notes

•When signals are input via the DV jack, the audio mode of the signals to be recorded is the same as that of the input signals. The setting of this item is ignored.

•You cannot change the setting of this item during recording.

•Noise may occur at the instant you switch the audio mode.

JOG AUDIO Turns sound output on/off when the tape is played at a speed other than normal.

OFF : Does not output the sound when playing a tape at a speed other than normal.

ON: Outputs the sound when playing a tape at a speed other than normal.

Note

Even if you have set this item to ON, the sound may not be output or interrupted depending on the tape format (DVCAM/DV) or tape conditions.

Menus Through Setting and Adjusting 5 Chapter

64 (GB) Chapter 5 Adjusting and Setting Through Menus