Recording and Playback 2 Chapter

PlaybackTo video equipment without a DV jack

You can connect this unit to video equipment without a DV jack. Use this unit as follows.

Monitor

DSR-25 (player)

Monitor

Recorder

(rear panel)

 

Audio input

Video input

S-video input

Audio cable (Phono jack) (not supplied)

75 Ω coaxial cable (not supplied)

S-video cable (not supplied)

: Signal flow

Connect either an S-video cable or 75 Ω coaxial cable as a video cable.

Note

If you connect the input connectors of this unit to the output connectors of a recorder or that of a monitor, a humming noise may be generated or the image may be distorted. If these phenomena occur, perform one of the following:

•Set EE/PB SEL on the DISPLAY SET menu to PB.

•Set the INPUT SELECT selector to a position where a signal is not currently being input.

•Disconnect the cables.

30 (GB)

Chapter 2 Playback and Recording