Notes

•You cannot pause during a duplicate process.

•Before you start duplication, make sure that the player has finished loading the cassette.

•The duplication starts after the i.LINK communication is established so that the first part of the source tape is dropped on the copied tape. Play back the source tape from the preceding point.

•If the player has an auto repeat function, set the function to off.

•You may not be able to duplicate the first part of the source tape. Locate the recorded portion on the source tape, then start duplicating.

•If there is a blank portion on the tape, the first part of the recorded portion that follows may be dropped on the copied tape.

•If you start duplication at some midpoint in the tape, the search function may not work correctly on the copied tape or problems may occur when editing. It is recommended that you select AUTOq or AUTOq for the duplicate mode.

Detecting a blank portion during duplication

If the unit detects a blank portion on the source tape during duplication, the skip function will automatically skip the blank portion, reducing the length of the recorded part of the tape. (This function is available only when the duplicate mode is AUTOq or AUTOq.)

The operations of the player and recorder (this unit) when a blank portion is detected are as follows:

Detected status on

Player/Recorder (this unit)

source tape

operation

 

 

Detects a blank portion

Player: Continues playing the

 

tape.

 

Recorder: Continues

 

recording.

 

 

10 seconds after detection

Player: Continues playing the

of a blank portion

tape another 10

 

seconds and searches

 

forward.

 

Recorder: Stops.

 

 

Detects next recorded

Player: Rewinds the tape at

portion

about –2 times normal

 

speed to the location

 

immediately before the

 

blank portion ends.

 

Recorder: Remains stopped.

 

 

Returns to the location

Player: After entering the

immediately before the

playback pause mode,

blank portion ends

starts playing the tape.

 

Recorder: After entering the

 

recording pause

 

mode, starts

 

recording.

 

 

This unit performs the above operations automatically, reducing the blank portion by 10 or more seconds in duplicating a tape.

Notes

•If the duplicate mode has been set to MANUALq, this unit will not skip a blank portion even if detects one.

•Depending on the specifications, the skip function may not work on some players.

•When this unit resumes duplication, the first part of the recorded portion on the source tape may be dropped on the copied tape.

•A recorded portion of less than one minute between two blank portions may not be duplicated.

Dubbing Audio and Duplication 4 Chapter

Chapter 4 Duplication and Audio Dubbing

49 (GB)