Connections and Fitting 2 Chapter
Fitting the Lens
In the case of the | Note | |
model, the lens is already fitted. In other cases, use the | Be sure to turn off the power before fitting the lens. | |
following procedure to fit the lens. |
| |
1 Remove the retaining rubber |
| |
which prevents the lens mount |
| |
from coming loose, then raise | Retaining rubber | |
the lens fixing lever, and | ||
| ||
remove the lens mount cap. |
|
Lens mount cap | Lens fixing lever |
|
2 With the lens fixing lever turned fully counterclockwise, push in the lens, aligning the projection on the lens with the cutout on the camcorder.
Align and push in.
3 Supporting the lens, turn the lens fixing lever fully clockwise. Replace the retaining rubber on the lens mount.
32 | Chapter 2 Fitting and Connections |