Menu 220 Using Setup Add (for DSR-300 Only)

Use this menu to add setup to the playback video signals.

1 Display menu 220.

The setup add is factory-set to oFF.

220oFF

Blinking

Setup add on/oFF indication

If the setting does not need to be changed, press the MENU button to close the menu.

2 Press the SHIFT button to make the setup add on/ oFF indication start blinking, then press the ADVANCE button to change the setting to on.

3 Press the RESET/(MENU SET) button and then the MENU button.

The settings are recorded and display window returns to the display shown before the VCR menu.

During recording the signal of the image being shot contains setup add, when it is output from the camcorder’s S VIDEO OUT and MONITOR OUT connectors.

During playback, the setup is removed from the output video signal.

To have the setup added during playback, set the setup add to on.

Settings and Adjustments 5 Chapter

Chapter 5 Adjustments and Settings

99