Using Accessories

Using the LC-421 Carrying Case

Connections and Fitting 2 Chapter

Stowing the camcorder

Align the camcorder with the base of the case, and slide the camcorder in forward.

Checking that the pin at the rear engages correctly, push forward until it locks into place.

Notes

•Turn the viewfinder downward, slide it fully rearward and to the left, then fix before stowing.

•When an optional microphone (ECM-670/672, C-74, etc.) is attached, loosen the microphone fixing screws, move the microphone to the lowest position, and fix before stowing.

Align the camcorder with the base of the carrying case.

Base Lever

Example of fully-stowed carrying case

DSR-300/300P Camcorder

This can be stored with the following system component fitted.

•DXF-701WS/701WSCE Viewfinder

•ECM-670/672/C-74 Microphone

•Zoom lens (VCL-714BXA etc.)

(Largest lens which can be stowed is Canon YH18 × 6.7KRS.)

•CAC-12 Microphone Holder

LC-421 Carrying Case

VCT-U14 Tripod Adaptor

Fasten straps.

Cassettes, camera cables, etc.

42

Chapter 2 Fitting and Connections