Menu 211 Selecting ClipLink

 

Menu 212 Selecting Audio

Function

 

Recording Mode

 

 

 

This setting must be made when not using the ClipLink function.

For details of the ClipLink function, see “ClipLink Shooting” (page 65).

1 Display menu 211.

The ClipLink function is factory-set to on.

211on

Blinking

ClipLink function on/oFF indication

If the setting does not need to be changed, press the MENU button to close the menu.

2 Press the SHIFT button to make the ClipLink function on/oFF indication start blinking. Press the ADVANCE button to change the indication to oFF.

3 Press the RESET/(MENU SET) button and then the MENU button.

The settings are recorded and display window returns to the display shown before the VCR menu.

The audio recording mode can be set to either of the following modes.

48-kHz mode (factory setting): Enables two- channel recording mode with 48-kHz sampling frequency.

32-kHz mode: Enables four-channel recording mode with 32-kHz sampling frequency (for CH-1 and CH-2).

1 Display menu 212.

The menu number and current audio recording mode is displayed.

Example: 48 (2-channel mode with 48-kHz sampling frequency)

21248

Blinking

Audio recording mode indication

If the setting does not need to be changed, press the MENU button to close the menu.

2 Press the SHIFT button to make the audio recording mode indication start blinking, then press the ADVANCE button.

This switches the mode setting to the other audio recording mode.

Example: 32 (4-channel mode with 32-kHz sampling frequency)

21232

Blinking

3 Press the RESET/(MENU SET) button and then the MENU button.

The settings are recorded and display window returns to the display shown before the VCR menu.

Settings and Adjustments 5 Chapter

Chapter 5 Adjustments and Settings

97