Sony manual 86

Viewfinder Advanced Menu

Advanced menu page 4

￿

PAGE4 (NEXTm$ PREVm4)￿

￿

MARKER : CENT/90%￿

mZEBRA : 1 ￿

ZEBRA1 : 70IREa)￿

REC TIME: INT￿

VF SDTL : ± 0￿

VF￿TALLY:￿ × 2￿

￿

EXIT MENU (YESmPUSH)

a) For DSR-300P: 70%

	Item	Settings
	MARKER	CENT/90% (normal value):
	Selects ON/OFF setting for	Displays center marker and
	center marker, size setting	safety zone marker at 90%
	(percentage of viewfinder	size.
	screen area), and display	CENT/80%: Displays center
	ON/OFF setting.	marker and safety zone
		marker at 80% size.
		90%: Displays only safety
		zone marker at 90% size.
		80%: Displays only safety
		zone marker at 80% size.
		CENT: Displays only center
		marker.
	ZEBRA	1 (normal value): Displays
	Selects type of zebra pattern	the zebra pattern over parts
	display.	having a video level.
Chapter
		between 70 and 90 IRE (or
		70 and 90%).
4		Use the next item (ZEBRA1)
		to select the base level.
Viewfinder
		levels of 100 IRE or above
		2: Displays the zebra pattern
		over parts having video
Screen		( or 100% or above).
		1/2: Dual display (both 1
Indications		and 2)
	pattern 1.	to 90%
	ZEBRA1	70 IRE (normal value) to 90
	Sets base level for zebra	IRE or 70% (normal value)
and		Can be set for each IRE
		step or 1% step.
Menus
	REC TIME	INT (normal value):
	Selects whether to show the	Recording time of the
	recording time (TTL) of the	internal VCR
	internal VCR or of the	EXT: Recording time of the
	external VCR.	external VCR
	VF SDTL	–99 to ±0 (normal value) to
	Sets the detail level of	+99
	images on the viewfinder	Negative values set softer
	screen (displayed when	edges and positive values
	using a viewfinder other than	set sharper edges.
	the DXF-701/701CE/701WS/
	701WSCE).
	VF TALLY	×1: Uses only the upper
	Selects whether or not to use	REC/TALLY indicator.
	more than one REC/TALLY	×2 (normal value): Uses
	indicators in the viewfinder	two REC/TALLY indicators.
	(displayed only when the
	DXF-701WS/701WSCE
	viewfinder is attached).

Advanced menu page 5

￿

PAGE5 (NEXTm$ PREVm4)￿

￿

mSS IND: ALWAYS￿

LL IND: ON ￿

IRIS IND: ON￿

GAIN IND: ON￿

FILTER IND: ON ￿

WHITE IND: ON￿

SKIN IND: ON￿

￿

EXIT MENU (YESmPUSH)￿

Item	Settings
SS IND	3SEC: Displays shutter
Selects the mode for	setting for three seconds only
showing the shutter setting	when the setting has been
when displaying the normal	changed.
indications.	ALWAYS (normal value):
	Displays the shutter setting at
	all times.
LL IND	ON (normal value):
Selects whether or not to	Displays.
show the LOW LIGHT	OFF: Not display.
indication on the normal
indications when inadequate
lighting is detected.
IRIS IND	ON (normal value):
Selects whether or not to	Displays.
show the lens’s F-stop value	OFF: Not display.
(iris indication) on the
normal indications. The F-
stop value is always
displayed when in EZ mode.
GAIN IND	ON (normal value): Always
Selects whether or not to	displays.
always show the gain	OFF: displays for two
setting indication on the	seconds only when the
normal indications.	setting has been changed.
FILTER IND	ON (normal value): Always
Selects whether or not to	displays.
always show the FILTER	OFF: Displays for two
knob setting indication on	seconds only when the
the normal indications.	setting has been changed.
The FILTER knob setting
indication is always
displayed when in EZ mode.
WHITE IND	ON (normal value): Displays.
Selects whether or not to	OFF: Not display.
show the setting of the white
balance switch.
SKIN IND	ON (normal value): Displays.
Selects whether or not to	OFF: Not display.
show the setting for skin
detail correction.

86 Chapter 4 Viewfinder Screen Indications and Menus