1 Remove the cover of the

Projection B

Projection A

camcorder grip and break off

 

 

projection A (see the figure).

 

 

2 Pass the cable through the grip as shown in the figure and replace the cover.

When using equipment other than the camcorder for power supply

Break off projections A and B on the camcorder. (See step 1 of the previous section “When using a video light with a long cable”.) Insert the cable into the grip from the front hole and take out from the rear hole as shown in the figure.

Connections and Fitting 2 Chapter

Chapter 2 Fitting and Connections

37