q Tape remaining indication | During recording or pause mode, this indication shows the remaining tape time as | ||||||||
| shown below. It is not displayed when no cassette is loaded. |
|
| ||||||
|
| Indication |
| Tape time remaining |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
| TAPEppppppp |
| 30 minutes or more |
|
| |||
|
| TAPEpppppp |
| 25 to 30 minutes |
|
| |||
|
| TAPEppppp |
| 20 to 25 minutes |
|
| |||
|
| TAPEpppp |
| 15 to 20 minutes |
|
| |||
|
| TAPEppp |
| 10 to 15 minutes |
|
| |||
|
| TAPEpp |
| 5 to 10 minutes |
|
| |||
|
| TAPEp |
| 2 to 5 minutes |
|
| |||
|
| TAPEp(blinking) |
| 0 to 2 minutes |
|
| |||
|
| TAPE (blinking) |
| End of tape |
|
| |||
|
|
|
|
|
|
|
| ||
r Clip remaining indication | This shows how many clip shots or Cue points can be recorded1). | ||||||||
|
| Indication |
| Clip shots | Cue point | ||||
|
|
|
|
|
|
|
|
| |
|
| CLIPpppppp |
| 51 or more | 101 points or more | ||||
|
| CLIPppppp |
| 41 to 50 | 81 to 100 points | ||||
|
| CLIPpppp |
| 31 to 40 | 61 to 80 points | ||||
|
| CLIPppp |
| 21 to 30 | 41 to 60 points | ||||
|
| CLIPpp |
| 11 to 20 | 21 to 40 points | ||||
|
| CLIPp |
| 1 to 10 | 1 to 20 points | ||||
|
| CLIPp(blinking) 2) |
| 1 to 3 | 1 to 6 points | ||||
|
| CLIP |
| Cannot record |
|
| |||
|
| CLIP (blinking) 2) |
| Cannot record |
|
| |||
| 1) The optional | ||||||||
| 2) When back space editing using ClipLink function is possible (when CONT is | ||||||||
| displayed) |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
s Time value indication | Depending on the DISPLAY switch (6 on page 14) setting, this shows a counter | ||||||||
| value, time code value or user bit value. Press the MENU button (1 on page 18) to | ||||||||
| display the VCR menu. |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Overview 1 Chapter
Resets the time value shown in the display window. This button operates differently depending on settings of the DISPLAY switch (6 on page 14) and the TC mode switch 1 (9 on page 19) and 2 (8 on page 19).
Switch setting | RESET button operation |
|
|
DISPLAY: COUNTER | Resets counter value to |
| 0:00:00. |
|
|
DISPLAY: TC | Resets time code to |
TC mode switch 1: PRESET | 00:00:00:00. |
TC mode switch 2: SET |
|
|
|
DISPLAY: | Resets user bit a) to |
TC mode switch 1: PRESET | 00 00 00 00. |
TC mode switch 2: SET |
|
|
|
Also, this button is used to change menu settings.
For details on the VCR menu, see “Setting on the VCR Section ⎯VCR Menu” (page 91).
0SpeakerOutputs the recorded or playback audio. When a warning indicator appears in the viewfinder or display window, the speaker sounds a warning tone.
The speaker is muted (does not output a warning tone) when an earphone is connected to the EARPHONE connector (3 on page 14).
For details on the warning tone, see “Warning System” (page 115).
a)Bits of time code recorded on tape, in which users can record necessary information.
Chapter 1 Overview 17