Sony VCR Menu Operation, 1,6, 2,4, 3,4, Basic Operation, To exit from changing settings

VCR Menu Operation

Basic Operation

		Display window
WARNING				OVER		OVER	LIGHT
	PB DATE NDF EXT-LK		HOLD		dB		ON
					0
							OFF
	H	MIN SEC	FRM		-12
					-20
RESET	CLIP	CL CONT IP
							DISPLAY
5	TAPE				-30
			DVCAM				COUNTER
	BATT E	F	Li		-40
					-∞		TC
	DIAG RF SERVO HUMID SLACK 1				F 8 32k	2	U-BIT
					F 8 48k

(MENU SET)

1,6

REC TIME SKIN DTL			EXT VTR	MENU ADVANCE			SHIFT
TTL			OUTPUT
		ON COMPONENT.
DUR		OFF	VBS
OFF			Y/C						AUDIO LEVEL
TTL RESET		SET	VTR	MONITOR SELECT PRESET			F-RUN			AUTO
										MAN
			TRIGGER	CH-1
				MIX	REGEN		SET		AUDIO SELECT
			PARALLEL	CH-2
									CH-1	CH-2
				EXT
			INT ONLY					LITHIUM BATT
					DATE/TIME		R-RUN
			EXT ONLY						AUDIO IN
	HYPER MATRIX
				ClipLink
	GAIN	FRONT MIC				MONITOR OUT
		LOW CUT		CONTINUE						FRONT
ON	H.SAT					CHARACTER
										VJ MIC
OFF	FL	ON								WRR
	STD	OFF				ON				REAR
						OFF

2,4

3,4

Settings and Adjustments 5 Chapter

1 Press the MENU button.

“DIAG” appears in the display window and the time data display in the display window switches to the menu display.

1011997

Menu No. (blinking)

Year (factory-set to 1997)

2 Press the ADVANCE button repeatedly until the desired menu appears.

3 Press the SHIFT button.

This shows the current settings for the menu selected by step 2.

The setting can be changed for the digit that is blinking.

To exit from changing settings

Press the MENU button to close the menu.

4 Change the settings.

Operation	Step
Select digit to be changed	Press the SHIFT button.
Change the value	Press the ADVANCE
	button.

5 Press the RESET/(MENU SET) button.

This records the new setting and returns to a blinking display of the menu number.

6 Press the MENU button.

This returns the display window to the display shown before the VCR menu.

92 Chapter 5 Adjustments and Settings