Viewfinder Screen Indications
There are four types of indication screen which appear in the viewfinder, as follows.
•Normal indications
These show the operating state of the camcorder. (See page 74.)
•Status indications
Pressing the MENU switch up while the normal indications are present calls a display of current settings. (See page 77.)
•Basic menu
“CHECK DIAG” appears before basic menu page 1 when the self diagnostic function has detected an abnormality (see page 82).
Display by holding the |
| Status indications | ||
|
|
| ||
MENU switch up while |
|
|
| |
the normal indications |
|
|
| |
are present. |
| W H I T E : A 3 20 0K |
| |
|
|
| A . I R I S : S T D |
|
|
|
| M A T R IX : S T D | |
|
|
| D C C + : O F F | |
|
|
|
|
|
|
|
|
|
|
|
|
| SS: O FF |
|
|
|
| BAT T: 13 .0 V |
|
|
|
|
|
|
Viewfinder 4 Chapter
This provides settings for the lens iris, shutter speed and so forth, and also a titling screen. (See the section “Viewfinder Basic Menu” on page 78.)
•Advanced menu
This provides settings for the center marker, zebra pattern, viewfinder screen indications, and so forth.
Display by moving the POWER switch to the ON position.
Normal indications
REC
TCG 12:34:56:00
NG | AUTO BLACK |
|
198
Screen
(See the section “Viewfinder Advanced Menu” on page 83.)
Changing the Viewfinder DisplayUse the buttons and switches shown in the following figure to switch the viewfinder display among the
Switch by pressing the MENU switch down or press and turn the MENU dial downward.
:LOW LIGHT 98 04 01 SS : 1/1000 10:00AM
Page 1
mA.IRIS : ± 0
DTL LEV: ± 0
M.BLACK: ± 0
STRETCH: ± 0
SHUTTER: OFF
and Indications
normal indications, basic menu pages and advanced menu pages.
MENU dial | STATUS | ONOFF MENU | |
POWER switch | |||
|
| ||
MENU switch |
|
|
Displaying the normal indications and switching to the basic menu
Basic menu
Page 2
mSKIN DTL:OFF DL LEV :STD
Page 7a)
mTITLE IND(YESmPUSH)
Menus and Indications Screen ViewfinderMenus4 Chaptr
To display the normal indications, move the POWER switch to the ON position.
To switch to and from the basic menu, use the MENU switch or MENU dial.
a)The menu configuration differs according to the camcorder’s switch settings, the connected VCR, and the type of input signal. A
Chapter 4 Viewfinder Screen Indications and Menus 73