Notes

You can use only NP-BX1 (supplied) with your camcorder.

In the default setting, the camcorder turns itself off not to consume the battery power when no operations are performed for about 5 minutes ([Power Save]). To prevent staining the terminal, short-circuiting, etc., be sure to use a plastic bag to keep away from metal materials when carrying or storing the battery pack.

To remove the battery pack

Turn off your camcorder, remove the battery cover, and then remove the battery pack.

Be careful not to drop the battery pack.

To check the remaining battery power

An icon indicating the remaining battery power is displayed.

High

Low Empty

It will take approximately 1 minute to display the correct remaining battery power. The remaining battery power may not be displayed correctly depending on ambient conditions and the environment in which you are using your camcorder. Your camcorder cannot display the remaining battery life in minutes using the “InfoLITHIUM” battery.

Back to top

Copyright 2013 Sony Corporation

34

Page 34
Image 34
Sony HDR-MV1 manual To remove the battery pack, To check the remaining battery power