Jog mode playbackFollow the procedure below to play back in jog mode.

1

1,2,3

Jog mode playback

1 Press the JOG button so that the JOG button lights up. The p indicator lights up and the VTR enters still- picture mode.

2 Rotate the search dial in the desired playback direction and to the desired angle.

The tape is played back slowly, at a speed corresponding to the rotational speed of the search dial. A direction indicator (“or ” ) lights up to indicate the direction of playback.

3 Stop rotating the search dial to stop jog mode playback.The indicator lights up.

Note

You can change the search dial mode selection so that pressing the search dial switches the VTR between jog and shuttle modes.

For details on switching the search dial functions, refer to the supplied Mainenance Manual.

Shuttle mode playbackFollow the procedure below to play back in shuttle mode.

1

3 1,2,3

Shuttle mode playback

1 Press the SHUTTLE button so that the SHUTTLE button lights up.The pindicator lights up and the VTR enters still- picture mode.

2 Rotate the search dial in the desired playback direction and set the angle of rotation as required to obtain the desired playback speed.

Shuttle mode

(–60/–58/–50)(+60/+58/+50)

The tape is played back at a speed that corresponds to the angle of the search dial. A direction indicator (“or ” ) lights up to indicate the direction of playback.

The search dial clicks at the positions for still- picture and ±10 times normal-speed playback.

3 Set the search dial to center position for still- picture, or press the STOP button to stop shuttle mode playback.

Recording/Playback 5 Chapter

Chapter 5 Recording/Playback 5-11