4-6-1 Selecting the Audio Input Signal (A-IN CH-1~CH4)

Function buttons [F1] (A-IN CH1) to [F4] (A-IN CH4) select the audio input signal for the various channels.

SDI: Selects the audio signal input through the HD SDI INPUT connector.

AES/EBU: Selects the audio signal input through the AUDIO INPUT (AES/EBU) connectors.

analg: Selects the audio signal input through the AUDIO INPUT connectors.

[SDTI](Only when the optional HKDV-506A SDTI Board is installed.): When the SDTI signal input to the SDTI (OPTION) IN connector is selected for the input video signal, the audio signal input to the SDTI (OPTION) IN connector is automatically selected for the input audio signal as well. SDTI is displayed and can not be changed.

4-6-3 Selecting the MonitorOutput Signal (MON-L SEL/MON-R SEL)

The [F9] (MON-L SEL) and [F10] (MON-R SEL) buttons allow you to specify the audio channel to be output from the left and right MONITOR OUTPUT connectors, respectively.

1:Audio channel 12:Audio channel 23:Audio channel 34:Audio channel 45:Analog cue channel

When multiple channels are selected for a single connector, all of the numbers are displayed.

Select the output signal to be monitored as follows:

4 Chapter

4-6-2 Setting Emphasis (EMPHASIS)

To apply emphasis to a digital audio signal that has been converted from an analog input audio signal, set the [F7] (EMPHASIS) button to on.

Making the settingFollow the steps below to set the monitor output signal.1 Press the [F9] (MON-L SEL) or [F10] (MON-R SEL) button.

The setting display section lights up.

2 Press numeric buttons 1 to 4 to select audio channels 1 to 4, or numeric button 5 for the analog cue channel.

Example: Pressing numeric buttons 1 and 2 selects audio channels 1 and 2, leaving audio channels 3 and 4, and the analog cue channel off.

“12...” appears in the display.

3 To set the entered audio channels, press the respective function button ([F9] or [F10]).

Settings Menu

Chapter 4 Menu Settings 4-43