Recording/Playback 5 Chapter

5-3 Preparing for Playback

5-3-1 Setting Switches and Menus

Before starting playback, set the switches and menus as shown in the diagram below.

For details, refer to the pages indicated in the parentheses.

POWER switch: ON

AUDIO INPUT/MONITOR SELECT buttons:

 

Audio channels to be monitored (page 5-2)

 

DIGITALVIDEO CASSETTE RECORDER HDW-F500

PB level controls:

REMOTE buttons: None of

Playback level

these buttons light up.

Menu settings

[F1] (TIMER SEL) button in the TC menu: Select the time data to be displayed.

[F6] (TCG SOURCE) button in the TC menu: int-LTC, int-VITC, ext-LTC, ext-VITC (see page 4-25)

[F7] (TCG MODE) button in the TC menu: regene, prst, auto (see page 4-25)

Setting switches and menus

5-3-2 Adjusting the Audio Playback Level

If the PB level controls on the upper control panel are pushed in, audio signals are output at the factory-set level (+4 dBm output for signals recorded at the 0 dB reference level).

For details on changing the factory-set reference output level, refer to the supplied Maintenance Manual.

To adjust the audio playback level manuallyPull and rotate the PB level control for the corresponding channel.

DIGITALVIDEO CASSETTE RECORDER HDW-F500

PB level controls

To adjust the audio playback level manually

5-6

Chapter 5 Recording/Playback