Sony HDW-F500 Items Related to Prerolling (401~)

Items Related to Prerolling (401~)

The values enclosed in a box are factory settings.

Item number	Item	Settable range	Function
401	FUNCTION MODE	[stop]	Selects the operation mode that the VTR changes to after
	AFTER CUE-UP	still	completingacueupoperation.
			stop :Entersstopmode.
			still : Entersstill-picturemode(searchmode).

			Note
			When setting the standard constant on the editor and
			controltheunit,setto “stop.”
403	CUEUP BY TC	capstanonly	This setting is only active when item 602. is set to TC or
		[reel/capstan]	UBIT.
			capstan only: The tape runs with the pinch ON during cue
			up. (The maximum tape speed is ten times normal tape
			speed.)
			reel/capstan: The tape runs with the pinch OFF state during
			cue up. When the tape nears the cue up point and tape
			speed drops to slow, the pinch turns ON.
404	CUEUP BY CTL	[capstan only]	This setting is only active when item 602. is set to CTL.
		reel/capstan	capstan only:ThetaperunswiththepinchON stateduring
			cue up. (The maximum tape speed is ten times normal
			tape speed.)
			reel/capstan: The tape runs with the pinch OFF state during
			cue up. When the tape nears the cue up point and tape
			speed drops to slow, the pinch turns ON.
			When this unit is controlled by an editor (BVE-2000/BVE-
			9100, etc), and the seting is “reel/capstan”, cue up
			operations are done at high speed.
			Select“capstanonly”wheneditingprecisionhaspriority.
405	CUE MENU	[page mode]	Selects the default mode when the CUE menu is opened.
	DEFAULT MODE	extendmode	page mode: PAGE mode
	select		extend mode: EXTEND mode
406	CUE MENU	[0 sec]	Sets the preroll time for a cueing up operation from the CUE
	PREROLL	.	menu.
	OFFSET	30 sec
407	AUTO REWIND	[off]	Selects the rewind mode for the end of the tape.
		on	off: The tape transport stops at the end of the tape.
			on: The tape is automatically rewound from the end of the
			tape.

Appendix

Appendix A-47