1REF. OUT 1125 SYNC connectors (BNC) Outputs a trilevel sync signal for the external synchronization. The field frequency is synchronized to the input video signal.

2D CONV. OUT (OPTION) COMPOSITE (SUPER) connector (BNC)

Outputs an analog composite signal for a video monitor. When the ALT/[F6] (CHARA SUPER) setting in the TC menu is on, character signals such as time codes are superimposed on the output.

Note

This connector is operative only when the optional HKDV-501A HD-SD Converter Board is installed.

3D CONV. OUT (OPTION) SYNC connector (BNC)Outputs an NTSC external sync signal.

Notes

•This is effective only when the optional HKDV-501A HD-SD Converter Board is installed.

•The phase is the same as the phase of the composite signal output from the COMPOSITE (SUPER) of D CONV. OUT (OPTION) connector. Because the output phase changes with the operation mode of the VTR, use this to synchronize with the video monitor.

4REF. IN SD connectors (BNC) and 75 Ωtermination switch

Inputs for a reference video signal (NTSC or PAL) of the selected field frequency. Use a video signal with chroma burst (VBS) or a monochrome video signal (VS).

A loop-through connection is possible. Set the 75 Ω termination switch to OFF if you are using a loop- through connection and set it to ON if you are not using a loop-through connection.

5REF. IN HD connectors (BNC) and 75 Ω termination switch

Inputs for a reference video signal (HD) of the selected field frequency. Use a trilevel SYNC signal for the external synchronization. A loop-through connection is possible. Set the 75 Ω termination switch to OFF if you are using a loop-through connection and set it to ON if you are not using a loop-through connection.

6BREAKER buttonPrimary circuit breaker for the AC power circuit.

7 ⁄AC IN connector and connector Connects to an AC outlet using the power cord supplied with the VTR.

8AUDIO INPUT (AES/EBU) connectors (BNC) Inputs for digital signals in AES/EBU format for channels 1 to 4.

9AUDIO OUTPUT (AES/EBU)connectors (BNC) Outputs digital signals in AES/EBU format for channels 1 through 4.

!º HD SDI (SDI video/audio) INPUT connectors (BNC)The left connector accepts HD SDI video/audio signals.

Note

The INPUT MONITOR connector is for use with an input monitor and does not follow the standards for output.

!¡ HD SDI (SDI video/audio) OUTPUT connectors (BNC)Outputs up to four (1 to 4) HD SDI video/audio signal lines.

Character data such as time codes are superimposed on the signal from the MONITOR connector when the ALT/[F6] (CHARA SUPER) setting in the TC menu is set.

!™ SDTI (OPTION) IN connector (BNC)Outputs a video/audio SDTI signal.

Note

This connector is operative only when the optional HKDV-506A SDTI Board is installed.

!£ SDTI (OPTION) OUT connector (BNC) Inputs a video/audio SDTI signal.

Note

This connector is operative only when the optional HKDV-506A SDTI Board is installed.

Controls and Parts of Functions and Locations 2 Chapter

Chapter 2 Locations and Functions of Parts and Controls

2-15