Sony HDW-F500 6-1-4Setting Edit Points, 6-1-3Selecting the Edit Mode, Insert mode:, Assemble mode:, Select assemble or insert mode, Positioning and setting edit points

6-1-3 Selecting the Edit ModeSelect assemble or insert mode.

[F3] (ASSEMBLE) button in the HOME menu

[F4] (INS TC) to [F10] (INS CUE) buttons in the HOME menu

Selecting the edit mode

Press one of the following buttons to select the respective edit mode:•Assemble mode: [F3] (ASSEMBLE) button in the HOME menu

•Insert mode: the appropriate INSERT button in the HOME menu ([F4] (INS TC), [F5] (INS VIDEO), [F6] (INS A-CH1), [F7] (INS A-CH2), [F8] (INS A-CH3), [F9] (INS A-CH4), [F10] (INS CUE))

6-1-4 Setting Edit Points

This section describes how to set edit points (IN and OUT points). In insert mode, a technque called split editing allows you to set edit points separately for video and audio.

Positioning and setting edit points

1

32

Positioning and setting edit points

1 Press the RECORDER or PLAYER button to select the VTR for which edit points are to be set. The button lights up.

2 Rotate the search dial in jog or shuttle mode to position the edit point.

For details on jog or shuttle playback, refer to “5-4-2 Variable Speed Playback” on page 5-10.

3 Press the IN (or OUT) button while holding down the ENTRY button.The time data for the IN (or OUT) point appears in the menu display.

4 Repeat Steps 1 to 3 to set the remaining edit points. Editing can begin when the points are set.

Editing 6 Chapter

Chapter 6 Editing 6-3