Sony HDW-F500 Items Related to the Audio Control (801~)

Items Related to the Audio Control (801~)

The values enclosed in a box are the factory settings.

Item number	Item	Settable range	Function
801	AUDIO INPUT	analg	Selects the type and channels of the audio input signals.
	select	[SDI]	analg: Audio signals input to the ANALOG AUDIO INPUT
	ALL-CHANNELS	AES/EBU	connectors.
		[SDTI]	SDI: Audio signals input to the HD SDI INPUT connectors.
			AES/EBU: Audio signals input to the AUDIO INPUT (AES/
802	AUDIO INPUT	analg
			EBU)connectors.
	select	[SDI]
			[SDTI] (Only when the optional HKDV-506A SDTI Board is
	CH-1	AES/EBU
			installed.): If “SDTI” is selected in item 701., the SDTI
		[SDTI]
			audio signal input to the SDTI (OPTION) IN connector is
803	AUDIO INPUT	analg	automatically selected and AUDIO INPUT/MONITOR
	select	[SDI]	SELECT buttons on the upper control panel become
	CH-2	AES/EBU	unlitandanotherinputselectioncannotbemade.
		[SDTI]
804	AUDIO INPUT	analg
	select	[SDI]
	CH-3	AES/EBU
		[SDTI]
805	AUDIO INPUT	analg
	select	[SDI]
	CH-4	AES/EBU
		[SDTI]
806	AUDIO EMPHASIS	[off]	Selectstheemphasismodewhenrecordingdigitalaudio
		on	signalsconvertedfromanaloginputaudiosignals.
			off: Emphasis is not applied to any of the audio signals.
			on: Emphasis is applied to all of the audio signals.
807	AUDIO MONITOR-	[ch1]	Selects the audio channel output from the AUDIO
	Lselect	ch2	MONITOR OUTPUT L connector.
		.
		ch1, ch2, ch3, ch4, cue
808	AUDIO MONITOR-	ch1	Selects the audio channel output from the AUDIO
	R select	[ch2]	MONITOR OUTPUT R connector.
		.
		ch1, ch2, ch3, ch4, cue
809	DIGITAL JOG	off	Switchesdigitaljogsoundonandoff.
	SOUND	[on]	off: Digitaljogsoundisswitchedoff.
			In this case, the sound for channels for which speed
			correctionprocessingisnotbeingcarriedoutisoutput,
			even in the case of “STILL.”
			on: Digital jog sound is switched on.
811	DIGITAL AUDIO	5 ms	Specifiesthefadeprocessingtimeduringcross-fadingor
	FADE TIME	[10 ms]	fading-in/outofdigitalaudiosignals.
		15 ms
			Note
		20 ms
			Processingforcrossfading,fading-in,andfading-outstarts
		25 ms a)
		50 ms b)	after an IN or OUT point. This item specifies rewriting
		85 ms	duringrecordingfollowingtheOUTpoint. Rewritingofone
		115 ms c)	field occurs even when the minimum setting (5 ms) is
			selected. When “cut edit” is selected in item 317 to prevent
			thisfromhappening,adiscontinuityintheaudiosignal
			occurs. There is, however, no effect on the recording of the
			videosignal.
			a) The cross fade time is 24 ms.
			b) The actual fade time is 49 ms.
			c) The actual fade time is 114 ms.

Appendix

Appendix A-59