Sony HDW-F500 manual 156

Appendix

Menu List

Item number	Item	Settable range	Function
606	TCG MODE select	[preset]	Selects the time code to which the internal time code
		regene	generatorsynchronizes.
		auto	preset: By an operation on the front panel or by remote
			control from a device connected to the REMOTE 1-IN
			(9P) connector, the initial value of the time code
			generated by the internal time code generator can be
			preset.
			regene:Theinternaltimecodegeneratorissynchronized
			(“regene”) to the time code values read by the internal
			timecodegenerator.
			auto: Operates in regene mode when either assemble or
			insert mode is selected and operates in preset mode
			when any other mode is selected.
607	TCG REGENE	[int-LTC]	If item 606 is set to “regene,” this selects the source of the
	SOURCE select	int-VITC	synchronizationofthetimecodegeneratedinternally.
		ext-LTC	int-LTC: When the time code played back from the time
		ext-VITC	code track on the tape is used.
			int-VITC: When the time code played back from the “AUX
			data” in the video signal on the tape is used.
			ext-LTC: When the external time code input to the TIME
			CODE IN connector is used.
			ext-VITC: When the external time code input to the HD SDI
			INPUT connector is used.
608	TCG/UBG	[TC & UB]	Selects the regenerate signal when the time code generator
	REGENE MODE	TC	is in regenerate mode (when item 606. is set to regene) or
		UB	duringautoeditmode.
			TC & UB: The time code signal and user bits signal are both
			regenerated.
			TC: The time code signal is regenerated.
			UB: The user bits signal is regenerated.
609	REC RUN/FREE	[free run]	This selects the way in which the time code advances.
	RUN select	recrun	free run: Regardless of the operating mode of this unit, the
			time code advances all the time that the power is on.
			recrun:Thetimecodeadvancesonlyduringrecording.

			Note
			Whenusingthis setting, set item 606.to“preset”.
610	VITC (NTSC)	[off]	Selects whether or not to insert VITC data in the HD-SD
		on	converteroutput.
			off: VITC data is inserted.
			on: VITC data is not inserted.
611	VITC POSITION-1	12 line	When an HKDV-501A (optional HD-SD Converter Board) is
	select	.	installed, selects the lines in which the VITC signal is
		[16 line]	inserted.
		.	It can be inserted in any lines from 12 to 20.
		20 line
			Note
			Items 611 and 612 allow VITC to be inserted in two lines.
612	VITC POSITION-2	12 line	When an HKDV-501A (optional HD-SD Converter Board) is
	select	.	installed, selects the lines in which the VITC signal is
		[18 line]	inserted.
		.	It can be inserted in any lines from 12 to 20.
		20 line
			Note
			Items 611 and 612 allow VITC to be inserted in two lines.

A-50Appendix