5Make sure that the built-in flash and flash unit are fully charged.

•“ ” is lit in the viewfinder when the built-in flash is fully charged.

•When the flash unit is fully charged in the wireless flash mode, the AF illuminator on the front blinks, and the TEST button is lit in amber.

6Use test flash to check the flash.

•The test flash method differs depending on the camera used. For details, refer the operation instructions of your camera.

•If the test flash does not work, change the position of the camera, flash or subject.

7Check again that the built-in flash and the flash unit are fully charged, and press the shutter button to take the photo.

GB42